Should I attach a projector screen?

First, let's consider cases where wall projection is sufficient. The Aestiquo Q1 features automatic four-corner correction, which automatically compensates for minor distortions. If you have a white wall, you can easily enjoy a large screen experience.

For example, when projecting onto a white wall in your living room, the Q1's automatic correction feature comes in handy. Many user reviews mention being able to "complete setup and start watching within 5 minutes." This ease of use is one of the reasons for the popularity of mini projectors.

Additionally, the Aestiquo P1 allows for manual fine-tuning. While it requires a bit more effort, with careful adjustment, you can achieve quite good picture quality even on a wall. For student rooms or temporary use, wall projection should be sufficient.

However, if you're seeking a more immersive viewing experience, you should consider installing a screen. The main reasons are as follows:

Improved Picture Quality

According to JEITA's Screen Standards (https://www.jeita.or.jp/standard/), using an appropriate screen improves brightness, contrast, and color reproduction. The improvement in contrast ratio, in particular, plays a significant role in bringing out details in dark scenes.

Aestiquo products use LED light sources, which are energy-efficient and long-lasting, but their brightness is set to be somewhat lower. In such cases, the improved reflectivity from a screen significantly enhances picture quality.

Elimination of Corner Focus Blur

The "corner focus blur" problem, reported by many users, becomes particularly noticeable when projecting at a wide angle. While the Aestiquo Q1 has automatic four-corner correction, there are limits to physical distortion correction.

By using a screen, you can maintain an appropriate projection distance, minimizing focus blur. Additionally, the surface of a dedicated screen is designed to provide uniform light reflection, which helps achieve consistent focus across the entire image.

Reduced Ambient Light Impact

Viewing in a bright room is one of the biggest challenges for projectors. Screens use special materials that absorb ambient light and reflect only the light from the projector. This allows you to enjoy a relatively clear image even in a bright room.

Since Aestiquo products are designed with relatively lower brightness, the effect of a screen is particularly noticeable in brighter environments.

So, what kind of screen is best for the Aestiquo P1/Q1? We recommend choosing based on the following points:

Size

Aestiquo products are characterized by their ability to project a large screen from a relatively short distance. In the case of the Q1, you can enjoy a 100-inch large screen from a distance of approximately 2.5m. Therefore, we recommend choosing an 80-100 inch screen to match your room size.

Material

For use in bright rooms, a high-contrast type screen is suitable. For dark rooms, a standard white screen is sufficient. Also, since Aestiquo products use LED light sources, choosing a screen with excellent color reproduction will maximize their features.

Installation Method

For rental properties, tabletop or tripod screens are more suitable than wall-mounted ones. Roll-up screens, which are easy to store, are also popular. Since Aestiquo products are compact, a simple screen will suffice.

So, if we were to ultimately answer the question, "Should I install a projector screen?", the answer would be "Judge according to the situation."

The Aestiquo P1/Q1 are excellent products that can flexibly adapt to either scenario. To optimize your settings, please refer to the following guides:

Finally, when purchasing a screen, always choose a product that meets JEITA standards. This will ensure a safe and high-quality viewing experience for a long time.